Custom 4-Link Fabrication Kit 1/2 Thread, 1/2 Bore Chromoly PTFE Heim Joints with Bungs for 1 OD .120 Wall Tubing & Misalignment Spacers Included - [6101B10]

Custom 4-Link Fabrication Kit 1/2 Thread, 1/2 Bore Chromoly PTFE Heim Joints with Bungs for 1 OD .120 Wall Tubing & Misalignment Spacers Included - [6101B10]

50 Caliber Racing 4 Link Rod End Kit - 1/2-20 x 1/2 Bore Chromoly Heims, Bungs for 1 OD Tubing, .120 Wall with Misalignment Spacers

Rod end fabrication kit complete with 1/2 x 1/2 heat treated chromoly heim joints, jam nuts, and weld in bungs (tube adapter). Designed specifically for 1 OD tubing, with wall thickness of .120. Heim joints are made from 4130 Chromoly steel, with a nylon / teflon PTFE liner. The load rating and size make these excellent for building a custom sway bar end links, tie rods and radius arms for UTVs, cars, trucks and more. Includes 4 Left hand thread and 4 Right hand thread heim joints, matching bungs and misalignment spacers.

Includes:
- (4) 1/2-20 x 1/2 bore Heim Joints - RH Thread
- (4) 1/2-20 x 1/2 bore Heim Joints - LH Thread
- (4) RH Jam Nuts
- (4) LH Jam Nuts
- (4) RH Weld in Bungs (tubing adapter)
- (4) LH Weld in Bungs (tubing adapter)
- (16) High Misalignment Spacers

Specifications:

Heim Joints:
- 4130 Chromoly Steel, Nylon / Teflon (PTFE) Liner
- Static radial load rating: 16,238 lb
- Thread pitch: 1/2-20
- Bore: 1/2
- Ball end diameter: 1.312
- Socket width: .500
- Ball width: .625
- Center line length: 2.438

Bungs:
- Thread: Female 1/2-20
- Material: Chromoly Steel
- Thread Length: Full length
- 1 OD x .120 Wall x 0.76 ID

Misalignment Spacers:
- Material: Chromoly Steel
- Surface finish: Zinc plated
- .375 ID x .499 OD x .500 W
- Compatible with 3/8 bolt size

Features of Custom 4-Link Fabrication Kit 1/2 Thread, 1/2 Bore Chromoly PTFE Heim Joints with Bungs for 1 OD .120 Wall Tubing & Misalignment Spacers Included - [6101B10]

4 Link Rod End Kit for Fabricating custom linkage on ATVs UTVs, Cars Trucks, Sand Rails and Go Karts | 1/2 Thread, 1/2 Bore Chromoly PTFE Heims - Bungs for 1 OD .095 or .120 Wall Round Tubing | Excellent for building custom radius rods for 4 link setup, tie rods, and sway bar end links for UTVs, cars, trucks and more | Includes: 4- RHT Heim Joint, 4- LHT Heim Joint, 4 RHT Bung, 4 LHT Bung and Matching Jam Nuts | Misalignment spacers are optional, be sure to choose correct kit before ordering!